The LEVO works best when using coarsely ground herbs, larger than a grain of sand, so that they stay contained inside of the herb pod throughout the infusion process.

The temperature range for the 3 different cycles in the LEVO II are as follows; DRY; 75 – 175 degrees Fahrenheit ACTIVATE; 200 – 275 degrees Fahrenheit INFUSE; 75 – 200 degrees Fahrenheit

Both Dry and Activate cycles heat your botanical ingredients (within the Herb Pod). The default setting for Dry is 115 F and 240 F for Activate. Once complete, you may add your oil, butter or honey to infuse.

LEVO is designed for infusing oil, butter or glycerin. It is not recommended for use with grain alcohol.

LEVO is intended for culinary and skincare uses. We do not endorse or recommend LEVO for the purpose of crafting vape ingredients.

We do not recommend or endorse infusing with solvents. Many solvents, like Everclear, have a boiling point of 172.9ºF at sea level, which is much lower than LEVO’s maximum temperature setting. This poses a risk of fire or electric shock, should your ingredients reach their boiling point and catch on fire or leak inside of […]

Yes! LEVO’s minimum is 5 oz, and maximum for LEVO II is 19 oz. However, you will need to make sure that the ingredients in your Herb Pod are fully submerged for the most effective infusion.

The Activate setting, yes. The Dry setting is recommended with herbs like Rosemary, Lavender and Thyme to reduce moisture before infusing, or storing for later use.

Remove the reservoir & nozzle. With the power on, press and hold down the RELEASE button while lifting the reservoir UP and out of the LEVO. If you have a LEVO II, unscrew the nozzle from the reservoir (LEVO I has attached nozzle). Place them in the dishwasher, or clean by hand with soap and […]